Toad hat covering

 The hats are of course not meant to be white, it was time for them to get a fabric covering. By now the hats had grown so large, both with the raising of the foam and the wadding, so I decided to make a new pattern for the fabric, rather than trying to use the old one.

I simply added a piece of pattern tissue on top of the hat and while feeling with my fingers where the seams were on the inside I traced it on the outside.

Here is a comparison of the original pattern for the foam, and the finished fabric pattern. It is pointier in the top where it will go together, while the bottom is more blunt since that will go to the head opening.

For fabric I used a sports lycra, the kind you use for swimwear. The fourway stretch is very forgiving, and I also liked the sheen of the fabric. When I cut the pieces I didn't add any seam allowance, but then when sewing them together I used 1,5 cm. This was perfect to make the fabric stretch over the hat and take away any bumps.

It still looks bumpy and and uneven here, but that is because I haven't closed the top. I can't do what until I have installed some way of helping with wearing the hat, and I can't do that without my husband since I need to fit that on him. Since I still haven't got the fabric for my own hat that means that I have to make a halt in this costume project. A good thing is that I could just eke out the hat pieces from just 1 m of fabric, so now I know how much I will have to order for myself, since the fabric is quite expensive and I can't see myself using it for anything else I don't want to buy extra fabric just in case.