A corset and and an insulin pump

For many years I didn't want to get an insulin pump and one of the arguments I had was that I couldn't see how it would work with my historical clothes. Last year I started using the omnipod5 tubeless pump, but I have been worried about how to wear it.

The pump is also connected to a continous glucose meter (CGM) and they can't be too far away from each other. For me it has worked really well to keep the CGM slightly above my navel and then alternate the pump to the left or right of it. I switch the CGM every 15 days and the pump every 3rd day. It had worked to wear the deviced under my 16th century bodices, but then I had planned it so that the pump was slightly below the waist. Now it was time to test it with one of my victorian corsets though.

My good friend Severing had a birthday party and everyone were encouraged to come in some historical dress. I had a hard time to decide what to wear, but when I posted the alternatives on my insta and FB it was clear that most people thought I should wear my can can ensemble. I also like it and figured it was time to test the pump and CGM with a proper corset.

I switched the pump 2 days before the party, which also meant that I wouldn't have to discard it too early if it didn't work. I placed it as far down as I dared, and with that it ended up at the lover edge of the corset. I also didn't lace it very tight below the waist, so that the pump and CGM wouldn't get too much pressure on them.

It worked really well the whole evening. I didn't feel any extra pressure on the devices and the regulated my insulin and blood sugar levels as usual, so they didn't get too compressed. I am really happy that it worked out, so that I can look forward to wearing more corsets in the future. I also realised that this corset must by now be 20 years old, sure I haven't worn it very much but I am actually a bit impressed that my sewing was this good 20 years ago and that it's still holding up,

A small trossfrau hat

 For Abi's funeral it was clear that our reenactment group was going to take a large part, and there were discussions on what we would wear. Many of us felt that we wanted to bring something 16th century to the funeral and many mentioned that they were going to wear their hats. Since Abi was also a cosplayer and liked black and purple I had decided to wear my Her Universe Endor dress, since it's black with purple details. It's a dress I've worn a lot to NärCon, and it was great meeting up with Abi there as well.

Me at Närcon back in 2018

The only 16th century hat that I have is red, but since I had found purple fabric to make flowers from I also decided to make a small trossfrau hat. Of course being me I didn't just want to make a simple hat, I got inspiration from Whilja's corner on how she made a hat with diagonal stripes on the brim. She made a fullsize hat, I decided to just make a small hat to perk on top of the head. Also to be honest this kind of hat in purple is not something I would wear with the rest of my 16th century clothes, so I didn't want to make it too big of a project.

I first cut out a straight piece of black wool that I had measured for the cirumference that I wanted and the width of the brim, when folded in half. I then cut out slashes diagonally in the wool. This would not have worked for a full sized hat, then the brim would collapse, but for this smaller version I didn't have to reinforce the wool in any way. The purple poufy fabric was simply a tube of poly taffetea, that I made longer and wider than the wool, so that it would pouf out between the bands.

I placed the purple tube in the middle of the black wool and folded it over.

I had to arrange the purple fabric and attach it with some stitches to make it look good. I also had to pleat the inner part of the brim to make it lie flat and round. Where the ends of the black met I also cut an extra slash when I saw how the ends overlapped and that it got very wide.

For the centre portion of the hat I first cut it out in the wool, and I made heartshaped cut outs, which I felt was so fitting for Abi. At first I made the purple layer larger, thinking it would look better when poofing out of the cut outs, but I changed my mind and cut it down to the same size. The two layeres were sewn together.

The centre was attached to the brim by hand. The rest of the hat was sewn on the machine. 

This was the finished hat from the top.

I added a pin in the centre, to mask that it wasn't perfectly aligned and I added a purple ribbon to keep the hat on my head.

The final touch was to stick two feathers into the brim. I didn't get any photos of me at the funeral or memorial, so this is me the morning after wearing the hat. I am really happy with it, but I'm not sure if I will wear it again.

Fabric flowers for a wedding and a funeral

 The last month has been emotionally complicated, and that is really a reason why I haven't made any posts about Medieval Week or Mimicon, that took place the week after.

The theme for Medieval Week this year was "love" and the best evening was when we organised a bethrotal and bethrotal feast for our very good friends Mattis and Emma. In the Middle Ages, at least in Sweden, it was actually the bethrotal that was the most important event.

Their wedding was planned for the 29th of August, but this was our way to give them a great Medieval feast as well, together with people who wouldn't be there for the wedding.

Me and David went home on Saturday, and then on Monday we got the news that the wonderful Abigail had passed away on early Monday morning, just 17 years old. Devastating news, of course the most for her family, but the whole family are really the core of the group. It was really strange knowing that our hugging goodbye on Friday evening was in fact a goodbye for much more than until the next sewing meeting or group get together.

As mentioned the wedding was on the 29th, and I had already planned to dye my hair purple to match my folk costume that I was going to wear, and then came the news of the funeral. The funeral was going to be on the first Friday after the wedding, and Abi's favorite colours were black and purple so we were welcome to wear purple for the funeral. 

I then also decided if I had something at home that I could make into accessories, and I started with making some fabric flowers in purple fabric that I found at home.

I started with ripping a strip of fabric, this is a polyester taffeta.

I folded the strip together until it was the width of a petal.

I cut it into a petal shape, making sure to keep the sides together.

Here is the full strip. I also zinged the edges over a tealight to stop them from frying.

Then I sewed a gathering thread along the straight edge and gathered it all together.

I sewed across the bottom of the gathered strip to shape it.

I found that I had these pearls attached to wires in my bead/pearl box. I put one in the middle of each flower, but sticking it through the fabric.

I made a little loop from the wire on the backside, so that I had something I could attach a hairpin to.

Here are the finished flowers. The bottom one was made from a 75 cm strip, and that as almost too big. The top flowers are made from cutting a similar strip in half. The bottom and the top left flowers were also just randomly gathered, but the top right one I worked a bit more with shaping the petals when I gathered them, and I think that one was the best.

For the wedding I put all three flowers in my hair. I didn't want to wear the traditional cap, I wanted something fun with my hair I also didn't wear traditional shoes but wore purple shoes as well.

For the funeral David put one of the flowers on his lapel. 

It was quite hard working on the flowers knowing that they were for both a wedding and funeral, but it also felt very fitting to make and wear them for both occasions. Life is full of joy and sorrow, and both these occasions will be connected to Abi.

And here is a photo of Emma and Mattis and I hope they will have a long and wonderful marriage.