So I had a pattern, and now it was time to cut into the main fabric. It's a olive wool twill and I cut them out on the bias. When cutting the pattern I realised that it must be way larger than I though. My husband is generally medium sized, and I still couldn't get the pattern to totally fit on the 3 m of fabric that I had.
I didn't document this process a lot, but I pinned the hose together, and then I repinned them until they were tight. In total I could cut away around 10 cm of fabric before they were snug. I don't really have an ambition to make totally historically accurate hose, so I then used the machine to tack them together. And that was good, because when we fitted the tacked together hose they were actually too tight. So I made a new seam and unripped the old one.
Before making the final seam I had the husband squat down and do a lot of movements to make sure that they were snug, but not too snug. I did make the final seam by hand. A handsewn seam made with linen is weaker than a machine sewn seam with modern sewing thread, and I wanted the seam and not the fabric to rip if it turned out that they were too tight.