Sunday 24 November 2019

HSM2019 . challenge 11 Above the belt - 16th century rosaries

Earlier this autumn I started thinking about reenactment and religion. Religion in the Middle Ages was everywhere and the Christian rituals were part of everyday life and with very few exceptions all people in Europe were part of the Catholic church. Still it's rarely spoken about, except for a few people who might come to medieval events as monks. I think there are a lot of personal reasons for this, and I totally understand that people might feel uncomfortable bringing in religion, especially if they don't share the beliefs of the Middle Ages. I'm not a Catholic but I decided to dive into the rabbit hole of researching late medieval religiosity and looking for religious accents to my 16th century wardrobe. Some information on the usage of rosaries can be found on my Swedish blog, historiekullan.

At the same time, of if this maybe was the inspiration I don't remember. Studio Västsvensk konservering published this photo of a rosary.

It was found in a grave from the excavations of Nya Lödöse. Nya Lödöse was a planned effort from the state to build up a new trading port on the only access that Sweden had to the North Sea during the years 1473-1624. It was hard to attract people to Nya Lödöse, but today it's successor Gothenborg is the second largest city in Sweden so in the end it worked out. If you are curious about Nya Lödöse they have a really good and informative site on the project here. The rosary itself consists of 49 small beads and 5 large beads made of an unknown wood. The string has disappeared and the years in the ground have darkened the wood to almost black.

I didn't know the size of the beads, so I ordered beads in two different three different sizes 8 and 10 mm for the small ones and 12 mm for the large ones. I first strung the 10 mm and 12 mm beads together.

I could see straight away that there wasn't much difference between the 10 mm and 12 mm beads, so if I were to use them as a rosary it would be hard knowing when I got to the larger beads. I also wasn't happy that the beads were glossy. To take away the varnish I put the beads first in a bowl of white vinegar (ättika) and water and let it lie there for a couple of hours. The white vinegar stripped away the varnish and the water started to turn some of the beads grey. After that I put them in a bowl of cooking oil for a while as well.

The aging process worked and the beads looked a lot better. On the photo above I also have the rosary I made from 8 mm and 12 mm beads. Those beads were untreated, so since I've made them I have instead taken to sitting and rolling the rosary between my fingers, to give them a used look. they have definitely turned darker from the treatment.

Rosary of 8 mm and 10 mm unvarnished beads
Rosary of 10 mm and 12 mm beads
 The beads are strung fairly tight. When I tried to roll the smaller rosary between my fingers, imitating the way you would use it during prayer it was also cear that it was hard to really feel the individual beads, due to them being so close to each other. This was something I had in mind when I made a third rosary. 

These simple rosaries of wooden beads are great as accessories for the simpler wardrobe I use at medieval events, but I am also working on an upper class wardrobe so I wanted a rosary suitable for that as well. 

Looking at 16th century portraits rosaries of red and gold beads were very popular. I really liked this rosary of red beads with golden, corrugated beads.

It turns out that coral was very popular for rosaries, because it was also seen as bringing good luck. I couldn't find large coral beads, but I did find 8 mm coral beads. Now an important thing about coral. Coral is the shell of sea creatures. Today many of the world's coral reefs are severely threatened by pollution and increased sea temperatures, there are also many cases of coral reefs being plundered to provide souvenirs and jewellery. I was very hesitant on using coral, since I don't want to help with the destruction of the reefs, but I found a Swedish supplier that explained that their coral beads were made from coral that's been farmed and harvested and doesn't come from wild coral reefs. Alternatives to using coral, and something I thought about, is agate, there are surviving medieval rosaries made of agate as well.


For the gold beads I found corrugated brass beads that looked very much like the painting, these I had to order on etsy though since I couldn't find any nice gold beads from Swedish suppliers. I strung the beads on silk cord for this rosary, and I made a knot between every set of 10 small beads so they wouldn't move around too much. For this rosary I didn't string them quite as close as the wooden rosaries, so it's easier to feel every individual bead.

The three rosaries side by side
I'm putting the rosaries in the "Above the belt" challenge since it was common to wear the rosaries on the belt, like the painting I posted above.

Even if the lady is holding the rosary it is attached to the belt



This is the smaller rosary being worn on the belt, it also shows the size of the smallest rosary.

The Challenge: 11 above the belt
Material: 8, 10, 12 mm wood beads, 8 mm coral beads, 5 brass beads
Pattern: none, made after several paintings
Year: 16 century
Notions: The wooden rosaries are strung on linen thread, the coral one on silk chord
How historically accurate is it? 85% As far as I know this is as close as you can get, but of course the beads are not made produced as they were in the middle ages
Hours to complete: 30 min total
First worn: not yet
Total cost: The wooden rosaries - $5 the coral rosary - $15

Saturday 2 November 2019

Spirit of the Mine 2019

Over the autumn school holiday and Halloween we have special tours in the mine that talk about the scarier histories. This is the time when actually talk about gruesome deaths and the mine spirit - the Lady of the Mine/Gruvfrun also makes an appearance.

I like playing the Lady of the Mine, but I have to work with what we have. There is an old white gown that has been used for a very long time in the mine and last year I bought several meters of organza to use for these special tours. I don't like the Lady being only dressed in white, since that according to folklore is a special sign and there are other stories of her being dressed as a rich woman in colorful clothes. Also during the tour I need to be able to run, quickly get out of the gown and back in again, so it still needed to be a loose garment. The solution was to simply pin swathes of organza on the white gown. My aim was to make the skirt look like she grew out of the floor and took a solid shape just above the waist

I also brought with me my own make up to try and paint her. I did use some UV paints in red and yellow to accent some features, because I show up in the dark in a segment. That's why I have a red stripe on my nose, but I still thought it looked good.

This is what I ended up looking like. The photos are taken with my phone, so they are a bit washed out, my hair and the organza are much brighter in real life.



And for some mysterious vibes



Friday 1 November 2019

AvestaCon photos

As I said in my previous post I had the opportunity to have photos taken with Red Island Media and he has already sent some of them to me.

My main priority was to finally get decent photos of my pilot. I have had several sessions with photographers for the pilot, and then they have disappeared without sending me the photos. This has made me weary about using photographers who don't get paid, or whom I don't already know. Thankfully I know this photographer, he is also the one who did the beautful Melisandre photos last year at AvestaCon.


Then I had just recently dyed my hair and I was really happy with the result, so I chose to do some photos of me as a regular Hogwarts student, so I could show off the hair. I'm calling these photos Autumn at Hogwarts



I had to have at least one photo of me as Luna as well though, and with some nice scenery around I wanted to have her in nature where she belongs


One of the best things with AvestaCon is the location, there are simply so many interesting things in a place made from slag bricks and with nature just around the corner.